Filter
Top Products
Chapter 21 WAN Device
Vantage Access User’s Guide
347
21.13.4 WAN IP Connection Statistics
Display the Stats screen to view the statistics of all IP connections on the WAN interface.
1 Select a registered device in the Device List window and click Data Model >
InternetGatewayDevice > WANDevice.
2 Click a number and WANConnectionDevice.
3 Click a number and WANIPConnection.
4 Click a number and Stats to display the screen as shown.
Figure 295 TR-098 Amendment 1: WAN Device: WANIPConnection: Stats
The following table describes the labels in this screen. Refer to Section 11.2.4 on page 132 for
other field descriptions.
InternalPort This field displays a port number for the internal port (between 1 and
4294967295) to which the device forwards packets with wildcard.
PortMappingProtocol This field displays the protocol (UDP or TCP) used for port mapping.
InternalClient This field displays the IP address or domain name of a host on the LAN.
To allow UDP port mapping or multiple NAT clients to use the same port
number, use the broadcast address of 255.255.255.255 for the internal
client.
PortMappingDescription This field displays a descriptive name (up to 256 characters) to identify this
port mapping entry.
Table 161 TR-098 Amendment 1: WAN Device: WANIPConnection: PortMapping: Details
PARAMETER NAME VALUE
Table 162 TR-098 Amendment 1: WAN Device: WANIPConnection: Stats
PARAMETER
NAME
VALUE
EthernetBytesSent This field displays the total number of bytes sent through the WAN since the
device was last reset.
EthernetBytesRec
eived
This field displays the total number of bytes received on the WAN since the
device was last reset.
EthernetPacketsS
ent
This field displays the total number of packets sent through the WAN since the
device was last reset.
EthernetPacketsR
eceived
This field displays the total number of packets received on the WAN since the
device was last reset.