Filter
Top Products
Chapter 23 STB Service
Vantage Access User’s Guide
413
The following table describes the fields in this screen. Refer to Section 11.2.4 on page 132 for
other field descriptions.
23.2.13 MPEG4 Part 10 Profile Levels
You can view and configure MPEG4 Part 10 Profile Levels in the ProfileLevel screen.
1 Select a registered device in the Device List window and click Data Model > Device >
Services > STBService.
2 Click a number and Capabilities.
3 Click Video Decoder > MPEG4Part10 > ProfileLevel to display the screen.
Figure 378 TR-135: STBService: Capabilities: MPEG4Part10 ProfileLevel
23.2.14 MPEG4 Part 10 Profile Level Settings
You can view and configure each MPEG4 Part 10 profile and level. Each is a combination of
profile and level.
1 Select a registered device in the Device List window and click Data Model > Device >
Services > STBService.
2 Click a number and Capabilities.
3 Click Video Decoder > MPEG4Part10 > ProfileLevel. Click a number to display the
screen.
Figure 379 TR-135: STBService: Capabilities: MPEG4Part10 ProfileLevel Settings
Table 214 TR-135: STBService: Capabilities: MPEG4Part10
PARAMETER NAME VALUE
AudioStandards This displays the MPEG4 Part 10 audio standards supported by the STB.
ProfileLevelNumberOf
Entries
This displays the number of profile levels.