Filter
Top Products
Chapter 17 LAN Device
Vantage Access User’s Guide
245
Figure 184 TR-098: LAN Device: Hosts: Host
17.9.2 LAN Host Table Details
Display the detailed Host screen to view or configure DHCP host settings (such as IP address,
lease time, etc.).
1 Select a registered device in the Device List window and click Data Model >
InternetGatewayDevice > LANDevice.
2 Click a number and Hosts.
3 Click Host and a number to display the screen.
Figure 185 TR-098: LAN Device: Hosts: Host: Details
The following table describes the fields in this screen. Refer to Section 11.2.4 on page 132 for
other field descriptions.
Table 96 TR-098: LAN Device: Hosts: Host: Details
PARAMETER NAME VALUE
IPAddress This field displays the IP address assigned to the LAN host.
AddressSource This field indicates whether the LAN host obtains the IP address statically
(Static), dynamically from the device (DHCP) or through automatic
assignment (Auto).
LeaseTimeRemaining If the host IP address is assigned through DHCP, this field displays the lease
time remaining (in seconds). A value of -1 means that the lease never times
out.
This field displays zero if the IP address assignment is not through DHCP.
MACAddress This field displays the MAC address of the LAN host.
HostName This field displays the name of the LAN host.
InterfaceType This field displays the name of the interface the LAN host uses to connect to
the device.
Active This field is Enabled to indicate that the LAN host is currently present in the
network. Otherwise, this field is Disable.