Filter
Top Products
Chapter 13 General Device Setup
Vantage Access User’s Guide
146
13.6 Time
Use the Time screen to configure time settings (such as the network time server and time
zone) on the device.
Click InternetGatewayDevice > Time.
Figure 72 TR-069: Time
The following table describes the labels in this screen. Refer to Section 11.2.4 on page 132 for
other field descriptions.
ConnectionReque
stPassword
This field displays the password associated with the user name above.
UpgradesManage
d
This field displays 1 to show that the Vantage Access may upgrade firmware on
the device. This field displays 0 to indicate that remote firmware upgrade through
Vantage Access is disabled.
KickURL This field displays the URL on the LAN from which the device can initiate a Kick
request.
DownloadProgres
sURL
This field displays the URL of a web site on the LAN to which a user’s web
browser is redirected to display the file transfer progress of the device.
Table 30 TR-069: ManagementServer (continued)
PARAMETER
NAME
VALUE
Table 31 TR-069: Time
PARAMETER
NAME
VALUE
NTPServer1 .. 5 This field displays the IP address or host name of the time server the device is to
use to update the system time. For example, “http://www.zyxel.com”.
CurrentLocalTime This field displays the current system time on the device.
LocalTimeZone This field displays the time offset from the UTC (Universal Time Coordinate). For
example, +08:00.
LocalTimeZoneNa
me
This field displays the name of the local time zone.