Filter
Top Products
Chapter 22 Voice Service
Vantage Access User’s Guide
361
22.3.2 MGCP Setup
You can view and configure the MGCP (Media Gateway Control Protocol) settings in the
MGCP screen. The Extensions field displays the name(s) of the MGCP package supported. If
there is more than one name, the names are separated by a comma. Refer to Section 11.2.4 on
page 132 for other field descriptions.
1 Select a registered device in the Device List window and click Configuration > Device
> Services > VoiceService.
2 Click a number and Capabilities.
3 Click MGCP to display the screen.
Figure 306 TR-104: VoiceService: Capabilities: MGCP
22.3.3 H.323 Setup
You can view and configure the H323 settings in the H323 screen.
1 Select a registered device in the Device List window and click Configuration > Device
> Services > VoiceService.
2 Click a number and Capabilities.
3 Click H323 to display the screen.
Transports This field displays the list of SIP transport protocols supported on the device.
URISchemes This field displays additional URI (Uniform Resource Identifier) schemes
supported on the device.
EventSubscription This field indicates whether SIP event subscription is activated on the device.
ResponseMap This field indicates whether SIP response map is activated on the device.
TLSAuthenticationPro
tocols
This field displays the authentication protocol used for TLS (Transport Layer
Security) communication.
TLSAuthenticationKey
Sizes
This field displays the size of the authentication key.
TLSEncryptionProtoc
ols
This field displays the encryption protocol used.
TLSEncryptionKeySiz
es
This field displays the size of the encryption key.
TLSKeyExchangeProt
ocols
This field displays the protocols used for key exchange.
Table 167 TR-104: VoiceService: Capabilities: SIP (continued)
PARAMETER NAME VALUE