Filter
Top Products
Chapter 15 WAN Device
Vantage Access User’s Guide
193
IdleDisconnectTime This field displays the number of seconds (between 0 and 4294967295) of
inactivity before a link times out. When the time is reached without any
network activity through the link, the device automatically disconnects the
link.
0 means you do not want the device to disconnect the link automatically.
WarnDisconnectDelay This field displays the number of seconds (between 0 and 4294967295)
before the device changes the state of the link to the disconnecting state.
RSIPAvailable This field displays whether the Realm-specific IP (RSIP) feature is
supported on the device.
NATEnabled This field displays 1 to indicate that the NAT (Network Address Translation)
feature is enabled for this link; otherwise, this field displays 0.
Username This field displays the Internet access account user name (up to 64
characters) provided by the ISP for authentication.
Password This field displays the Internet access account password (up to 64
characters) provided by the ISP for authentication.
PPPEncryptionProtocol This field displays the protocol used for PPP encryption between the device
and the ISP’s network.
PPPCompressionProtoc
ol
This field displays the protocol used for PPP traffic compression between
the device and the ISP’s network.
PPPAuthenticationProtoc
ol
This field displays the protocol used for PPP connection authentication
between the device and the ISP’s network.
ExternalIPAddress This field displays the IP address used by NAT for this connection.
RemoteIPAddress This field displays the remote IP address for this connection.
MaxMRUSize This field displays the maximum size (between 1 and 1540) for the Ethernet
frames allowed on this link.
CurrentMRUSize This field displays the current configured maximum frame size allowed from
a remote host.
DNSEnabled This field displays 1 to set the device to resolve domain names through this
link; otherwise, this field is 0.
DNSOverrideAllowed This field displays 1 to allow a non-empty DNS address to be replaced by a
DNS entry received on the WAN; otherwise, this field displays 0.
DNSServers This field displays the IP address(es) of the DNS server(s).
Multiple IP addresses are separated by a comma.
MACAddress This field is applicable when you select Enable in the
MACAdddressOverride field.
This field displays the MAC address of this interface on the device.
MACAddressOverride This field displays 1 to allow change of MAC address on this interface in the
MACAddress field.
This field displays 0 if you do not allow MAC address modification.
TransportType This field displays the transport protocol for the PPP connection.
PPPoEACName This field displays the descriptive name for the PPPoE Access
Concentrator (AC).
PPPoEServiceName This field displays the descriptive name for the PPPoE service.
ConnectionTrigger This field displays how the device will establish a connection (AlwaysOn,
OnDemand and Manual) for Internet access.
Table 62 TR-069: WAN Device: WANPPPConnection: Details (continued)
PARAMETER NAME VALUE