Filter
Top Products
Chapter 17 LAN Device
Vantage Access User’s Guide
234
The following table describes the fields in this screen. Refer to Section 11.2.4 on page 132 for
other field descriptions.
17.3.2 Ethernet Interface Statistics
The Stats screen shows the statistics on the LAN interface.
1 Select a registered device in the Device List window and click Data Model >
InternetGatewayDevice > LANDevice.
2 Click a number and LANEthernetInterfaceConfig.
3 Click a number and Stats.
Figure 171 TR-098: LAN Device: LANEthernetInterfaceConfig: Stats
The following table describes the fields in this screen. Refer to Section 11.2.4 on page 132 for
other field descriptions.
Table 89 TR-098: LAN Device: LANEthernetInterfaceConfig: Details
PARAMETER
NAME
VALUE
Enable This field displays 1 to indicate that the LAN Ethernet interface is active.
0 indicates the LAN Ethernet interface is disabled. In this case, no connection is
allowed.
Status This field displays the connection status of the Ethernet interface.
MACAddress This field displays the MAC address of the Ethernet interface.
MACAddress
ControlEnable
d
This field displays 1 to indicate that traffic with the specified MAC addresses is
allowed on this port. You can specify the MAC addresses in the
LANHostConfigManagement screen (refer to Section 17.2 on page 230).
This field displays 0 to indicate that MAC address control is disabled. All traffic is
allowed through the LAN interface.
MaxBitRate This field displays the connection speed in megabits per second (Mbps).
Auto (auto-negotiation) allows the port to negotiate with a peer port automatically to
obtain the connection speed that both ends support.
DuplexMode This field displays the duplex mode for the connection.
Auto allows the port to negotiate with a peer port automatically to obtain the duplex
mode that both ends support.
Table 90 TR-098: LAN Device: LANEthernetInterfaceConfig: Stats
PARAMETER
NAME
VALUE
BytesSent This field displays the number of transmitted bytes on this interface.
BytesReceive
d
This field displays the number of received bytes on this interface.