Filter
Top Products
Chapter 26 General Device Setup
Vantage Access User’s Guide
494
Figure 482 TR-106 Amendment 1: Device: Config
The following table describes the labels in this screen. Refer to Section 11.2.4 on page 132 for
other field descriptions.
26.6 Time
Use the Time screen to configure time settings (such as the network time server and time
zone) on the device.
Click Device > Time.
Figure 483 TR-106 Amendment 1: Time
The following table describes the labels in this screen. Refer to Section 11.2.4 on page 132 for
other field descriptions.
Table 292 TR-106 Amendment 1: Device: Config
PARAMETER
NAME
VALUE
PersistentData This field displays the configuration data that must remain intact after a device
system reboot.
ConfigFile This field displays the name of the vendor specific configuration file used for the
device.
Table 293 TR-106 Amendment 1: Time
PARAMETER
NAME
VALUE
NTPServer1 .. 5 This field displays the IP address or host name of a time server the device is to
use to update the system time. For example, “http://www.zyxel.com”.
CurrentLocalTime This field displays the current system time on the device.
LocalTimeZone This field displays the time offset from the UTC (Universal Time Coordinate). For
example, +08:00.