Filter
Top Products
Chapter 22 Voice Service
Vantage Access User’s Guide
384
22.14.2 Voice Profile Line SIP Setup
Use the SIP screen for a line to view and configure parameters associated to a SIP line.
1 Select a registered device in the Device List window and click Data Model > Device >
Services > VoiceService.
2 Click a number and VoiceProfile.
3 Click a number and Line
4 Click a number and SIP to display the screen.
Figure 340 TR-104: VoiceService: VoiceProfile: Line: SIP
The following table describes the fields in this screen. Refer to Section 11.2.4 on page 132 for
other field descriptions.
22.14.3 Line SIP Event Subscription
Use the EventSubscribe screen to view the list of SIP event subscriptions for a voice line.
Refer to Section 11.2.4 on page 132 for other field descriptions.
1 Select a registered device in the Device List window and click Data Model > Device >
Services > VoiceService.
2 Click a number and VoiceProfile.
PhyReferenceLi
st
This field displays the list of physical references associated with this line.
RingMuteStatus This field displays whether or not the ringing has been muted locally.
RingVolumeStat
us
This field displays the percentage volume of the current ring tone.
Table 189 TR-104: VoiceService: VoiceProfile: Line: Setup (continued)
PARAMETER
NAME
DESCRIPTION
Table 190 TR-104: VoiceService: VoiceProfile: Line: SIP
PARAMETER
NAME
VALUE
AuthUserName This field displays the account user name to connect to the SIP server.
AuthPassword This field displays the password associated with the user name above for
authentication.
URI This field displays the URI (Uniform Resource Identifier) to identify this SIP
connection.
SIPEventSubsc
ribeNumberOfE
lements
This field displays the number of SIP event subscription.