Filter
Top Products
5 - 20 5 - 20
MELSOFT
5 UTILITY OPERATIONS
5.2 PLC Monitor Utility
This section explains how to operate and set the PLC monitor utility.
5.2.1 Operations on transfer setting screen
This screen is used to set connection from the IBM-PC/AT compatible to the
programmable controller CPU.
(1) Selected menu item
Select [Online]-[Transfer setup] on the menu bar.
(This screen also appears when the PLC monitor utility is started.)
(2) Dialog box
(a) When choosing the utility setting type
Item Description
Utility setting type
Select when using the logical station number set on the communication setup utility to make
transfer setting.
Logical station number
Select the logical station number set on the communication setup utility.
When the logical station number where the modem communication data have been set is
selected, the following screen appears after OK
is clicked.
When you have set the password, enter the password and click OK
.
Connect Retry Times
Set the number of retries to be made when an error occurs during monitoring with the PLC
monitor utility. (default: 0)
Setting range: 0 to 9
POINT
Before specifying the logical station number, confirm that the settings of the logical
station number, such as the CPU type and station number, are correct on the
communication setup utility.