Filter
Top Products
2 - 16 2 - 16
MELSOFT
2 SYSTEM CONFIGURATIONS
2) Cables for connection of ACPU, QnACPU or FXCPU
The following cables are needed to make communications between
the IBM-PC/AT compatible and ACPU, QnACPU or FXCPU.
IBM-PC/AT Compatible Side
(RS-232C Cable)
RS-232C/RS422
Converter
Programmable controller Side
(RS-422 Cable)
For ACPU, QnACPU or FX1/FXU/FX2CCPU
FX-422CAB (0.3m/0.98feet)
FX-422CAB-150 (1.5m/4.92feet)
F2-232CAB-1*1
(When connector of IBM-PC/AT compatible
is D-sub 9-pin)
FX-232AW
FX-232AWC
FX-232AWC-H
(FX series only)
For FX
0/FX0S/FX0N/FX1N//FX1NC/FX1S/FX2N/FX2NC/
FX
3G/FX3U/FX3UCCPU
FX-422CAB0 (1.5m/4.92feet)
*1: How to identify compatible product of F2-232CAB-1 cable
Check the indication on the type label attached to the cable.
F2-232CAB-1
Y990C
F2-232CAB-1(F/FX/A)
Y990C
Incompatible product Indicates as a compatible product (with indication of F/FX/A
)
• When connecting to the FX
3GCPU, FX3UCPU or FX3UCCPU using
the FX-232AWC-H, select any of 9600bps, 19200bps, 38400bps,
57600bps or 115200bps for the transmission speed.
When connecting using the FX-232AWC or FX-232AW, select either
9600bps or 19200bps for the transmission speed.
3) Cables for connection of motion controller CPU
For communications between the IBM-PC/AT compatible and motion
controller CPU, use the cables as indicated in 2).
4) Converter/Cable (FX CPU compatible) for connecting to
the USB on personal computer
• Applicable devices
FX-USB-AW USB cable (Included with the product)
MITSUBISHI
FX-USB-AW
PW
SD
RD
FX
(RS-42 2)
B
• Above devices can be used when the driver included in the product
(CD-ROM) has been installed into either of the following operating
systems; Windows
R
98, Windows
R
Me, Windows
R
2000 Professional,
Windows
R
XP, Windows Vista
R
, and 32-bit Windows
R
7.