Filter
Top Products
8 - 5 8 - 5
MELSOFT
8 ACCESSIBLE DEVICES AND RANGES
Connected Station 4. Relay Target CPU
1. CPU
2. Connected module
(Usable control
name)
3. Relayed Network
QCPU
(Q mode)
Q12DC
CPU-V
LCPU QSCPU
QCPU
(A mode)
QnACPU ACPU FXCPU
Motion
controller
CPU
*
1
CC IE Control
CC IE Field
MELSECNET/H
MELSECNET/10
MELSECNET(II)
Ethernet
*
3
Computer link
CC-Link
Multidrop
(Independent mode)
QnACPU
QC24(N)
(ActAJ71QC24,
ActMLAJ71QC24)
Multidrop
(Synchronous mode)
CC IE Control
CC IE Field
MELSECNET/H
MELSECNET/10
*
8
MELSECNET(II)
*
8
Ethernet
Computer link
CC-Link
QCPU (A mode),
QnACPU
*
8,
ACPU,
motion controller CPU
UC24
(ActAJ71UC24,
(ActMLAJ71UC24)
Multidrop
*
8
CC IE Control
CC IE Field
MELSECNET/H
MELSECNET/10
*
9
*
9
*
9
*
9
MELSECNET(II)
*
9
*
9
*
9
*
9
Ethernet
Computer link
CC-Link
QCPU (A mode)
*9
,
QnACPU
*
10,
ACPU
*
9,
motion controller CPU
*9
C24
(ActAJ71C24,
ActMLAJ71C24)
Multidrop
*
9
*10
*
9
*
9
CC IE Control
CC IE Field
MELSECNET/H
MELSECNET/10
MELSECNET(II)
Ethernet
Computer link
*11
CC-Link
FXCPU
FX extended port
(ActFX485BD,
ActMLFX485BD)
Multidrop
*11
*
1: Accessible to the A171SHCPU, A172SHCPU, A173UHCPU(-S1) or A273UHCPU(-S3) only.
*3: Set the parameter-set values of the target station side Q series-compatible E71 or QE71 to the network number and station number.
Also set the "Station No.
IP information" of the Q series-compatible E71 or QE71 parameter setting.
At that
time
, specify any of the IP address calculation system, table conversion system and combined system as the "Station No.
IP
information system".
*8: Operates as the one equivalent to AnACPU. (except type character string)
Access can be made within the AnACPU device range except the following devices.
• File register(R), accumulator (A), index register (V), index register (Z).
• The following devices, latch relay (L) and step relay (S) make access to the internal relay (M).
*9: For AnUCPU, QCPU (A mode), A173UHCPU (-S1) and A273UHCPU (-S3)
Operates as the one equivalent to AnACPU. (except type character string)
Access can be made within the AnACPU device range except the following devices.
• Accumulator (A), index register (V), index register (Z).
*10: Operates as the one equivalent to AnA.
Access can be made within the AnACPU device range except the following devices.
• File register(R), accumulator (A), index register (V), index register (Z).
• The following devices, Latch relay (L) and Step relay (S) make access to the internal relay (M).
*11: Accessible to FX
0NCPU, FX1SCPU, FX1N(C)CPU, FX2N(C)CPU, FX3GCPU, FX3U(C)CPU only.