Filter
Top Products
6 - 22 6 - 22
MELSOFT
6 COMMUNICATION SETTING EXAMPLES OF THE UTILITY SETTING TYPE
(c) E71
The E71 requires an initial processing and communication line open
processing sequence program.
The sequence program example is given below.
1) For TCP/IP
Setting Item Set Value Setting Item Set Value
TCP/IP open system 8000H (TCP, fixed buffer send) E71's port number 500H
E71's IP address 192.168.0.2
(To the next page)
POINT
This sample sequence program is installed into the following folders after
installation of MX Component.
[User-specified folder]-[Act]-[Sample]-[Gppw]-[E71_tcp]