Filter
Top Products
6 - 106 6 - 106
MELSOFT
6 COMMUNICATION SETTING EXAMPLES OF THE UTILITY SETTING TYPE
(b) QC24N
Using the QC24N requires a sequence program to set the following buffer
memory addresses.
The following table indicates the buffer memory addresses that must be set
and the sequence program.
Setting Item
(Buffer Memory Address)
Settings
Setting in Sample
Sequence Program
Modem connection channel
designation (2E
H)
0: Not connected (modem function is not used)
1: CH1 side interface
2: CH2 side interface
1 (CH1)
Initialization data No. designation
(34
H) *1
0H: Send of initialization data specified in the sending
user registration frame specifying area
7D0
H to 7D4H: Initialization data No.
2000 (No. 2000)
Q6TEL connection designation (36H)
0: Does not make communication as Q6TEL.
1: Makes communication as Q6TEL.
1 (Communicate
as Q6TEL)
No-communication interval time
designation (37
H)
0: Unlimited waiting
1 to 120: No-communication interval time
(line disconnection waiting time)
10 (10 minutes)
*1: The following initialization data are factor-registered to the QC24N.
When the modem used corresponds to the initialization data (7D0
H to
7D4
H), specify the following registration number.
When using the modem where the initialization data have not been
registered, register the AT command to the E
2
PROM or buffer memory
address (1B00
H) of the QC24N.
Registration No. Corresponding Device
Hexadecimal Decimal
Initialization Command
Maker Type
7D0H 2000 ATQ0V1E1X1\J0\Q2\V2\N3S0=1 Aiwa
PV-AF2881WW
PV-BF288M2
7D1H 2001 ATQ0V1E1X1\Q2\V2\N3S0=1 Micro General Laboratory
MC288XE
MC288X1
7D2H 2002 ATQ0V1E1X1&K3\N3S0=1 Microcom
DESKPORTE22.8S
DESKPORTE33.6S
7D3H 2003 ATQ0V1E1X1&H1&R2&A3&D2S0=1 Omron ME3314B
7D4H 2004 ATQ0V1E1X1\J0\Q2\N3S0=1 Sun Electronic MS336AF