Filter
Top Products
6 - 26 6 - 26
MELSOFT
6 COMMUNICATION SETTING EXAMPLES OF THE UTILITY SETTING TYPE
(4) Making routing parameter setting
(a) Q series-compatible E71
Set the Q series-compatible E71 in "Ethernet parameter setting" of GX
Developer.
For the concept of the routing parameters, refer to "Appendix 1 Concept of the
Routing Parameters".
CPU to Be Set Setting Screen Example
CPU1
CPU2
(b) QE71
Set the QE71 in "Ethernet parameter setting" of GX Developer.
For the concept of the routing parameters, refer to "Appendix 1 Concept of the
Routing Parameters".
CPU to Be Set Setting Screen Example
CPU1
CPU2
(5) Making communications check
After completion of preparations for Ethernet communication, execute ping in the
MS-DOS mode to check connection before starting communications on MX
Component.
When normal
C:\>ping 192.168.0.2
Reply from 192.168.0.2:bytes=32 time<10ms TTL=32
When abnormal
C:\>ping 192.168.0.2
Request timed out.
If ping does not pass through, check module connections and Windows
R
side IP
address and other settings.