Filter
Top Products
6 - 35 6 - 35
MELSOFT
6 COMMUNICATION SETTING EXAMPLES OF THE UTILITY SETTING TYPE
6.4 Ethernet Communication
(In case of using CC-Link IE Field Network Ethernet adapter module)
This section provides the procedure for the Ethernet communication with the in case of
using CC-Link IE Field Network Ethernet adapter module and its setting example using
the utility setting type.
6.4.1 Accessing procedure
The procedure for making access to the programmable controller CPU using Ethernet
communication will be explained in the following order.
START
Connect the CC-Link IE Field Network Ethernet adapter
module and IBM-PC/AT compatible.
Start the communication setup utility and make
setting on the communication setting wizard.
On the communication test screen, check whether
communication can be made properly.
END
Refer to Chapter 2.
Refer to Section 6.4.1 (2).
Refer to Section 6.4.1 (3).
Refer to Chapter 2.
Connect the CC-Link IE Field Network Ethernet adapter
module and CC-Link IE Field Network.
(1) System example
The following system example is used in this section.
CC-Link IE Field Network module
IBM-PC/AT compatible
CC-Link IE Field Network
Ethernet adapter module