Filter
Top Products
6 - 36 6 - 36
MELSOFT
6 COMMUNICATION SETTING EXAMPLES OF THE UTILITY SETTING TYPE
(2) Setting the logical station number (Setting on communication
setting wizard)
Logical station number setting will be described using the system example for (1).
1) Start the communication setup utility and select the
communication setting wizard.
2) Type "12" in Logical station number and click Next>
.
3) Make settings as indicated below and click Next>
.
PC side I/F : Ethernet board
Connect module : CC IE Field Ethernet adapter
Protocol : TCP
Time out : 60000
(To the next page)
4) Make settings as indicated below and click Next>
.
PLC side I/F : CC IE Field Ethernet adapter
Host (IP Address) : 192.168.3.30