Filter
Top Products
6 - 67 6 - 67
MELSOFT
6 COMMUNICATION SETTING EXAMPLES OF THE UTILITY SETTING TYPE
(2) Checking and starting the CPU board
Check whether the CPU board is connected to the IBM-PC/AT compatible
properly and start the CPU board.
1) Click [Start]-[Programs]-[Melsec]-[AnU Utility] to start the
AnU utility.
2) Check whether the CPU board is operating properly.
Display the memory I/O test screen and click Start
to
perform the test any number of times.
Then, click Stop
to stop the test and make sure that the
CPU board is normal.
(To the next page)
3) Display the communication diagnosis screen and click
Start
to make sure that communication is made properly.
If an error has occurred, check the error code and remove
the error.
Refer to the CPU board manual for error code details.