Filter
Top Products
6 - 122 6 - 122
MELSOFT
6 COMMUNICATION SETTING EXAMPLES OF THE UTILITY SETTING TYPE
(3) Setting the Logical station number (Setting on communication
setting wizard)
This section describes the setting of the logical station number using (1) system
example.
1) Start the communication setup utility and select the
communication setting wizard.
2) Type "14" in Logical station number and click Next>
.
3) Make settings as indicated below and click Next>
.
PC side I/F : Ethernet board
Connect module : GOT
Port No : 5011
Time out : 60000
(To the next page)
4) Make settings as indicated below and click Next>
.
PLC side I/F : Ethernet board
Module type : GOT
Host (IP Address) : 192.168.0.1