Mitsubishi Electronics SW3D5C-ACT-E Frozen Dessert Maker User Manual


 
A - 17 A - 17
Instructions for use of Microsoft
R
Excel
(1) Precautions for starting multiple Excel files on Windows
R
Me
Note that Windows
R
Me has been confirmed to stop if you run multiple Excel files
which use many control objects.
* This phenomenon is not attributable to this product.
(a) Conditions on which this phenomenon has been confirmed to occur
Graphic driver : Matrox make MGA Mystique display driver
OS : Windows
R
Me (English version)
Number of controls pasted to Excel files
: A total of 150 or more controls used in the whole BOOK
<Other devices checked by Mitsubishi (reference)>
CPU : Pentium
R
166MHz
Memory : 64MB
Hard disk : 8GB (free space 6GB)
(b) Cause
The phenomenon has been confirmed to occur when the Matrox make MGA
Mystique graphic card display driver is used.
This is because Version 4.12 of the MGA Mystique graphic card display driver
is not compatible with Windows
R
Me.
(c) How to judge whether the phenomenon is the same or not
After changing the used graphic driver for the standard VGA driver, delete the
temporary data (*.emf) left in the temporary folder.
After that, try starting multiple Excel files.
The phenomenon seems to be the same if it does not occur by changing the
driver for the standard VGA driver.
(d) Corrective action
If this phenomenon occurs, the temporary data (*.emf) will be left in the
temporary folder of the system.
You have to delete the remaining temporary data (*.emf) manually.
The temporary folder of the system is normally in "C:\Temp".
After that, take either of the following actions.
1) Use the graphic card and display driver which support Windows
R
Me.
2) Reduce the number of control objects pasted to the Excel files.
(2) Precautions for the use of EXCEL VBA
Do not set the page feed preview function in the application that uses EXCEL VBA.
Doing so can cause a memory leak or OS basic operation (file operation, printing
or other) fault.
(3) Precautions for the use of Microsoft
R
Excel
(a) If you paste the control to Excel, it may sometimes not be pasted.
This phenomenon occurs if the cache file (temporary file) of Excel remains.
In such a case, perform operation in the following procedure.
1) Close Excel.
2) Delete "*.exd" in the Excel 8.0 folder of the temp folders. *1, *2
3) Restart Excel.
*1: The temp folder is located depending on the OS.
*2: When the corresponding folder and file are not displayed, Make the
settings in folder option setting. So that all files and folders will be
displayed.
(b) Excel allows ACT control resizing, which does not affect the operation of MX
Component.
To restore the size, set the Height and Width properties of ACT control to "24"
again.