Filter
Top Products
6 - 88 6 - 88
MELSOFT
6 COMMUNICATION SETTING EXAMPLES OF THE UTILITY SETTING TYPE
6.15 CC-Link IE Field Network Communication
This section provides the CC-Link IE Field Network communication procedure
and its setting example using the utility setting type.
6.15.1 Accessing procedure
The procedure for making access to the programmable controller CPU using CC-Link
IE Field Network communication will be explained in the following order.
START
Set the CC-Link IE Field Network board.
Connect the IBM-PC/AT compatible to the
CC-Link IE Field Network.
Start the communication setup utility and make
setting on the communication setting wizard.
On the communication test screen, check whether
communication can be made properly.
END
Refer to Chapter 2 and Section 6.15.1 (2).
Refer to Section 6.15.1 (3).
Refer to Section 6.15.1 (4).
(1) System example
The following system example is used in this section.