Filter
Top Products
6 - 117 6 - 117
MELSOFT
6 COMMUNICATION SETTING EXAMPLES OF THE UTILITY SETTING TYPE
(5) Setting the Logical station number (Setting on communication
setting wizard)
This section describes the setting of the logical station number using the Q
series-compatible C24 system example.
1) Start the communication setup utility and select the
communication setting wizard.
2) Type "13" in Logical station number and click Next>
.
3) Make settings as indicated below and click Next>
.
PC side I/F : Modem
Connect module : QJ71C24
Time out : 10000
(To the next page)
4) Make settings as indicated below and click Next>
.
Line type : Tone
Outside line number : None
Port : COM1
Call number : **********
(Enter the programmable
controller side phone number.)
AT command : Modem standard