Filter
Top Products
6 - 102 6 - 102
MELSOFT
6 COMMUNICATION SETTING EXAMPLES OF THE UTILITY SETTING TYPE
(2) Setting the Switch of A6TEL, Q6TEL, QC24N,
Q Series Corresponding C24, L series-compatible C24
(a) A6TEL, Q6TEL
The A6TEL and Q6TEL switch setting examples in this section are the
same as in "Section 6.17.1 Switch settings of A6TEL, Q6TEL, QC24N, Q
Series Corresponding C24, L Series Corresponding C24".
For details, refer to "Section 6.17.1 Switch settings of A6TEL, Q6TEL,
QC24N, Q Series Corresponding C24, L Series Corresponding C24".
(b) QC24N
Settings
Switch (Switch Number)
CH1 side *1
Mode setting switch 5 (format 5)
Station number setting switch 0
Operation setting switch (SW01) OFF (Independent operation)
Data bit setting (SW02) ON (8)
Parity bit presence/absence setting (SW03) OFF (No)
Even parity/odd parity setting (SW04) OFF (Odd)
Stop bit setting (SW05) OFF (1bit)
Sumcheck yes/no setting (SW06) ON (Yes)
Online change enable/disable setting (SW07) ON (Enable)
Setting change enable/disable setting (SW08) OFF (Disable)
19200bps
SW Settings
SW09 OFF
SW10 ON
SW11 ON
SW12 OFF
Transmission speed setting (SW09 to SW12)
Transmission
specification
setting
switches
(SW13 to SW15) All OFF
*1: Modem communication is available on the CH1 side only.