Filter
Top Products
5 - 26 5 - 26
MELSOFT
5 UTILITY OPERATIONS
Item Description
Set the order in which the bit devices being monitored are arranged.
Item Description
F-0 Arranged in order of F, E, ... 1, 0 from left to right.
0-F Arranged in order of 0, 1, ... E, F from left to right.
Bit order
1) (Monitor screen) Shows the buffer memory status.
2) (Target CPU name)
Shows the communication target CPU name specified on the communication setting wizard
screen.
3) (Communication path
information)
Shows such information as the network type, network number, first I/O address and station
number.
4) (Logical station number)
Shows the logical station number set for the utility setting type.
This does not appear when the program setting type is used.
POINT
(1) For the bit device statuses, 1 indicates an ON status and 0 an OFF status.
(2) For access to the FXCPU, enter the block number of the special expansion
equipment into Module I/O.
(3) Devices cannot be monitored if the connection destination is not established.
(4) During monitoring, you cannot make transfer setting.
(5) During monitoring, "
" flickers under the scroll button.
(6) During gateway function communication, devices cannot be monitored.