Filter
Top Products
8 - 53 8 - 53
MELSOFT
8 ACCESSIBLE DEVICES AND RANGES
(3) When using Q series-compatible C24, L series-compatible C24 and
QC24N
(a) Configuration
Connected
station CPU
Relayed
module
Relayed network
Relayed
station CPU
Relayed
module
IBM-PC/AT compatible
Modem
Subscriber line
Modem
1
3
4
Connected
module
2
(b) Accessibility list
The following table indicates whether access can be made or not.
The connected station CPUs are all accessible.
Whether the relay target CPU is accessible or not is indicated by
(accessible) or
(inaccessible).
Connected Station 4. Relay Target CPU
1. CPU
2. Connected unit
(Usable control name)
3. Relayed Network
QCPU
(Q mode)
Q12DC
CPU-V
LCPU QSCPU
QCPU
(A mode)
QnACPU ACPU FXCPU
Motion
controller
CPU
CC IE Control
CC IE Field
*1 *4
*1
MELSECNET/H
MELSECNET/10
MELSECNET(II)
Ethernet
Computer link
*2
CC-Link
QCPU
(Q mode)
Q series-compatible
C24
(ActQJ71C24TEL)
Multidrop
(Independent mode)
*3
*2
CC IE Field
*4
MELSECNET/H
MELSECNET/10
MELSECNET(II)
Ethernet
Computer link
*2
CC-Link
LCPU
L series-compatible
C24
(ActLJ71C24TEL)
Multidrop
(Independent mode)
*3
*2
CC IE Control
CC IE Field
MELSECNET/H
MELSECNET/10
MELSECNET(II)
Ethernet
Computer link
CC-Link
QnACPU
QC24N
(ActAJ71QC24TEL)
Multidrop
(Independent mode)
*3
*
1: Inaccessible to Q12DCCPU-V and QSCPU relayed by CC-Link IE Field Network since CC-Link IE Field Network is not supported.
*2: The Redundant CPU is inaccessible to the computer link module which is on the main base.
*
3: Indicates the CH2 side setting. (The CH1 side is fixed to the independent mode.)
*4: Inaccessible to LCPU relayed by CC-Link IE Controller Network since CC-Link IE Controller Network is not supported.