Filter
Top Products
6 - 43 6 - 43
MELSOFT
6 COMMUNICATION SETTING EXAMPLES OF THE UTILITY SETTING TYPE
6.6 CPU USB Communication
This section provides the CPU USB communication procedure and its setting example
using the utility setting type.
6.6.1 Accessing procedure
The procedure for making access to the programmable controller CPU using CPU
USB communication will be explained in the following order.
START
Connect the programmable controller CPU and
IBM-PC/AT compatible.
Start the communication setup utility and make
setting on the communication setting wizard.
On the communication test screen, check whether
communication can be made properly.
END
Refer to Chapter 2.
Refer to Section 6.6.1 (2).
Refer to Section 6.6.1 (3).
When using any of the following OSes, install the USB driver.
Refer to Operating Manual
(Startup).
Windows 2000 Professional
Windows XP
Windows Vista
Windows 7
(1) System example
The following system example is used in this section.
Logical station number of "4" is used.
IBM-PC/AT compatible
(MX Component) USB
is used.
Q02H
CPU
Normal station
(Sta. No.2)
Q02H
CPU
Normal station
(Sta. No.8)
MELSECNET/H
(Network No. 1)