Filter
Top Products
6 - 80 6 - 80
MELSOFT
6 COMMUNICATION SETTING EXAMPLES OF THE UTILITY SETTING TYPE
(From the previous page)
(Check complete)
5) Click the "Loop monitor" tab and make sure that the loop is
normal.
6) Click Exit
to exit from the utility.
(3) Setting the logical station number (Setting on communication
setting wizard)
Logical station number setting will be described using the system example for (1).
1) Start the communication setup utility and select the
communication setting wizard.
2) Type "10" in Logical station number and click Next>
.
(To the next page)
3) Make settings as indicated below and click Next>
.
PC side I/F : MELSECNET/H board
Board No : 1st module