Filter
Top Products
3 - 5 3 - 5
MELSOFT
3 OPERATION PROCEDURES
3.2.4 When using VBScript
The following creation procedures assumes use of VBScript.
Yes
No
Power on the IBM-PC/AT compatible and start
Windows .
Refer to the operating manual (startup).
Make settings using
the utility setting type?
<Utility setting type>
Start the communication setup utility
and make communication settings
in accordance with the wizard.
Set the property of the pasted
control. (Set only the logical station
number)
Refer to
Section 5.1,
Chapter 6.
Refer to the
programming
manual.
Refer to
Chapter 6.
No
Yes
Perform programming using the functions offered by
the corresponding ACT control.
Perform
debugging using the PLC monitor
utility?
Completion of user application
Refer to "Section 3.3 PLC Monitor Utility Operating
Procedure".
Refer to the programming manual.
<Program setting type>
Install MX Component.
Create a home page using the text
editor and HTML editor.
On the home page, generate the
ActMLEasyIF control so that
MX Component may be utilized
using VBScript.
Set the property of the pasted
control.
Refer to the
programming
manual.
Create a home page using the text
editor and HTML editor.
On the home page, generate the
ActMLEasyIF control so that
MX Component may be utilized
using VBScript.
Refer to
Chapter 6.
POINT
Refer to Appendix 2 for the way to start the Internet/intranet environment.