Filter
Top Products
A - 18 A - 18
Instructions for use of Microsoft
R
Access
(1) Precautions for the use of Microsoft
R
Access
(a) When you paste the ACT control to an Access form and double-click the ACT
control or select the custom control in the property, the following error
message will appear but this does not affect the operation of ACT control.
(Other error message may appear.)
(b) When you paste the ACT control and display the properties, the property
names displayed may be broken.
As this phenomenon occurs for only the property indication, there will be no
problem in the property functions.
(c) Access allows ACT control resizing, which does not affect the operation of
MX Component.
To restore the size, set the Height and Width properties of ACT control to "24"
again.
Instructions for use of VBScript and ASP function
(1) Security of the Internet/intranet when using VBScript
MX Component does not have the Internet/intranet security function.
When you need the security function, make setting on the user side.
(2) Precautions for making CPU COM communication, computer link communication,
CC-Link G4 communication or Ethernet (TCP/IP) communication on ASP page
and application*1 when Windows
R
2000 Professional is used.
If the ASP page opens CPU COM, computer link, CC-Link G4 or Ethernet
(TCP/IP) communication earlier than the application, communication in the same
path cannot be made on the application until the ASP page is closed. Therefore,
note the following points.
(a) CPU COM, computer link, CC-Link G4 or Ethernet (TCP/IP) communication
should be opened on the application earlier.
After it has been opened on the application, communication can be made on
both the application and ASP page until it is closed.
(b) When CPU COM, computer link, CC-Link G4 or Ethernet (TCP/IP)
communication has been opened on the ASP page, always close the
communication.
*1: The application indicates any of the user applications created using the MX
series and MELSOFT products.