Filter
Top Products
6 - 66 6 - 66
MELSOFT
6 COMMUNICATION SETTING EXAMPLES OF THE UTILITY SETTING TYPE
6.10 CPU Board Communication
This section provides the CPU board communication procedure and its setting
example using the utility setting type.
6.10.1 Accessing procedure
The procedure for making access to the CPU board using CPU board communication
will be explained in the following order.
START
END
Set the CPU board.
Fit the CPU board to the IBM-PC/AT compatible and
start the CPU board.
Start the communication setup utility and make
setting on the communication setting wizard.
On the communication test screen, check whether
communication can be made properly.
Refer to Chapter 2
and Section 6.10.1 (2).
Refer to Section 6.10.1 (3).
Refer to Section 6.10.1 (4).
(1) System example
The following system example is used in this section.
Logical station number of "8" is used.
IBM-PC/AT compatible
During RUN!
CPU board
(Equivalent to A2USHCPU-S1)
MX
Component