Filter
Top Products
6 - 27 6 - 27
MELSOFT
6 COMMUNICATION SETTING EXAMPLES OF THE UTILITY SETTING TYPE
(6) Setting the logical station number (Setting on communication
setting wizard)
Logical station number setting will be described using the system example for Q
series-compatible E71.
1) Start the communication setup utility and select the
communication setting wizard.
2) Type "2" in Logical station number and click Next>
.
3) Make settings as indicated below and click Next>
.
PC side I/F : Ethernet board
Connect module : QJ71E71
Protocol : TCP
Network No : 1
Station No : 2
Time out : 60000
(To the next page)
4) Make settings as indicated below and click Next>
.
PLC side I/F : Ethernet module
Module type : QJ71E71
Host (IP Address) : 192.168.0.1
Station No : 1