Filter
Top Products
2 - 19 2 - 19
MELSOFT
2 SYSTEM CONFIGURATIONS
7) RS-232 cable and function expansion board (special
adaptor) for FXCPU
Serial port shape of
personal computer
Series Required function expansion board and special adaptor RS-232 cable
FX3U-232-BD
FX3U, FX3UC
Function expansion board (FX
3U-***-BD) + FX3U-232ADP*
1
FX-232CAB-1
FX3G-232-BD
FX3G
FX
3G-CNV-ADP + FX3U-232ADP
FX-232CAB-1
FX0N-232ADP + FX2N-CNV-BD F2-232CAB-1
FX2N-232-BD
FX2N
FX
2NC-232ADP + FX2N-CNV-BD
FX-232CAB-1
FX0N-232ADP F2-232CAB-1
FX1NC,
FX2NC
FX
2NC-232ADP FX-232CAB-1
FX0N-232ADP + FX1N-CNV-BD F2-232CAB-1
FX1N-232-BD
D sub 9 pin
FX
1S,
FX1N
FX
2NC-232ADP + FX1N-CNV-BD
FX-232CAB-1
FX3U-232-BD
FX3U, FX3UC
Function expansion board (FX
3U-***-BD) + FX3U-232ADP*
1
FX-232CAB-1
FX3G-232-BD
FX3G
FX
3G-CNV-ADP + FX3U-232ADP
F2-232CAB-1
FX0N-232ADP + FX2N-CNV-BD F2-232CAB
FX2N-232-BD
FX2N
FX
2NC-232ADP + FX2N-CNV-BD
FX-232CAB-1
FX0N-232ADP F2-232CAB
FX1NC,
FX2NC
FX
2NC-232ADP FX-232CAB-1
FX0N-232ADP + FX1N-CNV-BD F2-232CAB
FX1N-232-BD
D sub 25 pin
FX
1S,
FX1N
FX
2NC-232ADP + FX1N-CNV-BD
FX-232CAB-1
*1: *** of the function expansion board (FX3U-***-BD) indicates 232, 485, 422,
USB or CNV.
Regarding FX
3UC series, only FX3UC-32MT-LTCPU and FX3UC-32MT-LT-2
CPU are connectable.
The computer link communication is also available for the FX
3U-485-BD.
For setting for the computer link communication, refer to Section 6.1.1 (4).
If "Operate communication setting" is checked on the <<PLC System
(2)>> tab in the "FX Parameter" dialog box of GX Developer, the
corresponding port cannot be used for communication with the
programmable controller.
In this case, write the setting, where the above setting has been
removed, from the built-in programming port of the programmable
controller.