Filter
Top Products
6 - 89 6 - 89
MELSOFT
6 COMMUNICATION SETTING EXAMPLES OF THE UTILITY SETTING TYPE
(2) Checking the CC-Link IE Field Network board
Check whether the IBM-PC/AT compatible is connected properly to the CC-Link
IE Field Network.
1) Click [Start]-[Program]-[MELSEC] -[CC IE Field
Board]-[CC IE Field Utility] to start the CC IE
Field utility.
2) The CC IE Field Utility screen appears.
Select [Project]-[New].
3) The Parameter setting screen appears.
Make the following settings, and click End
.
Network type : CC IE Field (Master station)
Channel No. : 181
Network No. : 1
Total Stations : 1
Mode : Online (Normal Mode)
(To the next page)
4) Select [Online]-[Write to Board] and write the
parameter settings of the project to the board.