Filter
Top Products
5 - 19 5 - 19
MELSOFT
5 UTILITY OPERATIONS
Item Description
AT command/password
cancellation retry count
Set the AT command/password cancellation retry count. (Default: 3)
Increase the set count if the AT command cannot be sent or the password cannot be
cancelled.
Setting range: 1 to 999
Line callback cancel wait
time
Set the Line callback cancel wait time. (Default: 90)
Increase the set time if the line at the other end (Q series corresponding C24 side) is not
disconnected within the set time depending on the line-connected region (example: overseas).
Setting range: 1 to 180
Call back delay time
Set the callback delay time. (Default: 20)
Increase the set time if the device for relaying connection to the line (example: modem, etc.)
requires the set time for reconnection after line disconnection.
Setting range: 1 to 999
Call back reception waiting
time-out
Set the callback reception waiting time-out. (Default: 120)
Increase the set time if a time-out occurs in a callback receive waiting status.
Setting range: 1 to 3600