Filter
Top Products
6 - 94 6 - 94
MELSOFT
6 COMMUNICATION SETTING EXAMPLES OF THE UTILITY SETTING TYPE
6.16 Q Series Bus Communication
This section provides the Q series bus communication procedure and its setting
example using the utility setting type.
6.16.1 Accessing procedure
The procedure for making access to the programmable controller CPU using Q series
bus communication will be explained in the following order.
START
Refer to PC CPU
module manual.
END
Start the communication setup utility and make
setting on the communication setting wizard.
On the communication test screen, check whether
communication can be made properly.
Refer to Section 6.16.1 (2).
Refer to Section 6.16.1 (3).
Load the programmable controller CPU and
PC CPU on the same base.
Set the PC CPU module.
Refer to Chapter 2.
(1) System example
The following system example is used in this section.
PC CPU module
Q12HCPU (No. 3)
Use "12" as lo
g
ical station number.