Filter
Top Products
6 - 12 6 - 12
MELSOFT
6 COMMUNICATION SETTING EXAMPLES OF THE UTILITY SETTING TYPE
(3) Setting the logical station number (Setting on communication
setting wizard)
Logical station number setting will be described using the system example for 1:n
communication.
1) Start the communication setup utility and select the
communication setting wizard.
2) Type "1" in Logical station number and click Next>
.
3) Make settings as indicated below and click Next>
.
PC side I/F : Serial
Connect port : COM1
Time out : 10000
(To the next page)
4) Make settings as indicated below and click Next>
.
PLC side I/F : C24 module
Module type : AJ71QC24
Station No : 1
Transmission speed : 9600
Parity : Odd
Control : DTR or RTS Control