Filter
Top Products
3 - 4 3 - 4
MELSOFT
3 OPERATION PROCEDURES
3.2.3 When using VBA
The following creation procedures assumes use of VBA.
Yes
No
No
Yes
Power on the IBM-PC/AT compatible and start
Windows .
Refer to the operating manual (startup).
Make settings using
the utility setting type?
<Utility setting type>
Start the communication setup utility
and make communication settings
in accordance with the wizard.
Set the property of the pasted
control. (Set only the logical station
number)
Refer to
Section 5.1,
Chapter 6.
Refer to the
programming
manual.
Refer to
Chapter 6.
Perform programming using the functions offered by
the corresponding ACT control.
Perform
debugging using the PLC monitor
utility?
Completion of user application
Refer to "Section 3.3 PLC Monitor Utility Operating
Procedure".
Refer to the programming manual.
<Program setting type>
Install MX Component.
Start Microsoft Excel or Microsoft
Access.
Start Visual Basic Editor and
create applications.
Generate the ActEasyIF control
so that MX Component may be
utilized on VBA.
Set the property of the pasted
control.
Refer to the
programming
manual.
Start Visual Basic Editor and
create applications.
Generate the corresponding
communication control so that MX
Component may be utilized on VBA.
Start Microsoft Excel or Microsoft
Access.
Refer to
Chapter 6.