Filter
Top Products
8 - 24 8 - 24
MELSOFT
8 ACCESSIBLE DEVICES AND RANGES
8.6.2 Accessible ranges
This section indicates the accessible ranges for MELSECNET/10 communication.
(1) Configuration
MELSECNET/10
1
Connected
station CPU
Connected
module
Relayed
module
2Relayed network
3
Relayed
module
Relay target
CPU
IBM-PC/AT compatible
(2) Accessibility list
The following table indicates whether access can be made or not.
The connected station CPUs and own board (MELSECNET/10 board) are all
accessible.
Whether the relay target CPU is accessible or not is indicated by
(accessible)
or
(inaccessible).
3. Relay Target CPU
1. Connected Station CPU
(Usable control name)
2. Relayed Network
QCPU
(Q mode)
Q12DC
CPU-V
LCPU QSCPU
QCPU
(A mode)
QnACPU ACPU FXCPU
Motion
controller
CPU
*
1
CC IE Control
CC IE Field
*2
*4
*2
MELSECNET/H
MELSECNET/10
MELSECNET(II)
Ethernet
Computer link
*3
QCPU(Q mode)
(ActMnet10BD, ActMLMnet10BD)
CC-Link
CC IE Control
CC IE Field
MELSECNET/H
MELSECNET/10
MELSECNET(II)
Ethernet
Computer link
Q12DCCPU-V
(ActMnet10BD, ActMLMnet10BD)
CC-Link
CC IE Control
CC IE Field
MELSECNET/H
MELSECNET/10
MELSECNET(II)
Ethernet
Computer link
QnACPU,
(ActMnet10BD, ActMLMnet10BD)
CC-Link
*1:
Accessible to the A171SHCPU, A172SHCPU, A173UHCPU(-S1) or A273UHCPU(-S3) only.
*2: Inaccessible to Q12DCCPU-V and QSCPU relayed by CC-Link IE Field Network since CC-Link IE Field Network is not supported.
*3: The Redundant CPU is inaccessible to the computer link module which is on the main base.
*4: Inaccessible to LCPU relayed by CC-Link IE Controller Network since CC-Link IE Controller Network is not supported.
(To the next page)