Filter
Top Products
Frequency Response Adjustment Menu
Softkeys
This section provides a brief description of each menu of softkeys. More detailed information
is provided in “Program Operation” in this chapter. The softkey order shown below may
vary with what appears on the computer display; the order differs depending on whether an
HP 9000 Series 200 or Series 300 computer is used.
Conditions
Menu
Ajust
Menu
displays the Adjust Menu, which allows you to perform an adjustment.
Refer to “Adjust Menu.”
Load
Cands
loads the CONDITIONS file from the disk specified by the system
mass storage file location.
Sensor
Utils
displays the Sensor Utilities Menu, which allows viewing, editing, and
adding power sensor data files. Refer to “Sensor Utilities Menu.”
Change Entry
permits changing a Conditions Menu entry, indicated by the pointer
along the left edge of the computer display. Press the (RETURN) or
(ENTER) keys to terminate an entry.
Verify Bus
Query DUT
S/N
checks each listed HP-IB address for response. Verify
flus
does not
verify that a particular piece of equipment is at a specified address.
queries the HP-IB for the serial number and model number of the
spectrum analyzer under test.
Store Conds
stores the current conditions in the CONDITIONS file on the specified
system mass storage file location.
Exit Program
exits the frequency response adjustment program.
Sensor
Utilities
Menu
View/Edit
Add File
Delete File
List Files
System File
Cond
Menu
allows user to view and edit power sensor data files.
creates a new power sensor data file.
deletes a power sensor data file. User is asked for confirmation before
deletion takes place.
lists all power sensor data files on the disk currently specified by the
system mass storage file location.
allows user to change the currently specified system mass storage file
location.
returns you to the Conditions Menu.
3-12 Frequency Response Adjustment Software