Filter
Top Products
Operating Information
2-2
2715 Spectrum Analyzer Service Manual
H Single and ∆ Markers A single marker can be enabled to show the
frequency and amplitude of a specific point on the display. Delta (∆)markers
show the difference frequency and amplitude between any selected two
points on the displayed waveform.
H Tracking Signal tracking holds a drifting signal to center screen.
H Center Measur e When this function is activated, the instrument completes
the sweep and centers the signal nearest center screen or, with markers
activated, the signal nearest the marker. A readout of center frequency and
amplitude is displayed.
H Display In the Spectral mode, the numerical values of signals and setup
parameters are displayed. In the Menu mode, a menu with its selections and
prompts is displayed. Any error, warning, or information messages are
displayed in both modes.
Conformance to Industry Standards
This Spectrum Analyzer conforms with the following industry safety standards
and regulatory requirements.
CAN/CSA C22.2, No. 231
UL 1244 (3rd Edition) Measuring Testing Equipment
Product Service
To ensure adequate product service and maintenance for our instruments,
Tektronix has established Field Offices and Service Centers at strategic points
throughout the United States and in countries where our products are sold.
Several types of maintenance or repair agreements are available.
For example, for a fixed fee, a maintenance agreement program provides
maintenance and recalibration on a regular basis. Tektronix will remind you
when a product is due for recalibration and perform the service within a specified
time.
Contact your local Tektronix Service Center, representative, or sales engineer for
details regarding product service.