Filter
Top Products
Operating Information
2715 Spectrum Analyzer Service Manual
2-13
0 ADJACENT CHANNEL LEAKAGE
1 VIEW MODULATION (FIELD)
2 VIEW MODULATION (LINE)
3 VIEW PICTURE
4LISTEN
5 CTB
6CSO
7 CROSS MODULATION
8 IN-CHANNEL RESPONSE
9MORE
0 RUN CROSS MODULATION
1 STORE CURRENT RESULTS
2 DISPLAY RESULTS
3 PRINT CURRENT RESULTS*
4 PRINT STORED R ESULTS*
9 LEAVE CROSS MODULATION
CATV/APPL CATV Measurements Page 2 Menu Structure
(2 of 2)
0 RUN IN-CHAN RESP
1 STORE CURRENT RESULTS
2 DISPLAY RESULTS
3 PRINT CURRENT RESULTS*
4 PRINT STORED R ESULTS*
5 SET UP IN-CHAN RESP
6 TEST SIGNAL LINE NUMBER**
7 IN-SERVICE
9 LEAVE IN-CHAN RESP
TEST MODES
0 INTERACTIVE
1 AUTO (PAUSE FOR SIGNAL ON)
TEST FREQUENCIES
2 User Defined (-500.000KHZ Default)
3 User Defined (+500.000KHZ Default)
4 User Defined (+1.25000MHZ Default)
5 User Defined (+2.00000MHZ Default)
6 User Defined (+3.00000MHZ Default)
7 User Defined (+3.75000MHZ Default)
8 USE DEFAULT TEST FREQUENCIES
To CATV/APPL
CAT V Measurements Page 1
TEST MODES IN-SERVICE
0 INTERACTIVE
1 AUTO
TEST FREQUENCIES
2 User Defined (-500.000KHZ Default)
3 User Defined (+500.000KHZ Default)
4 User Defined (+1.25000MHZ Default)
5 User Defined (+2.00000MHZ Default)
6 User Defined (+3.00000MHZ Default)
7 User Defined (+3.75000MHZ Default)
8 USE DEFAULT TEST FREQUENCIES
**
Displayed only when IN-SERVICE is On.
*
RS-232 only.