Filter
Top Products
Operating Information
2-12
2715 Spectrum Analyzer Service Manual
0 ADJACENT CHANNEL LEAKAGE
1 VIEW MODULATION (FIELD)
2 VIEW MODULATION (LINE)
3 VIEW PICTURE
4LISTEN
5 CTB
6CSO
7 CROSS MODULATION
8 IN-CHANNEL RESPONSE
9MORE
0 RUN CTB
1 STORE CURRENT RESULTS
2 DISPLAY RESULTS
3 PRINT CURRENT LEVELS*
4 PRINT STORED R ESULTS*
5 SET UP CTB
6 DIGITAL/ANALOG
9 LEAVE CTB
TEST MODES
0 INTERACTIVE
1 AUTO
2 AUTO (PAUSE FOR CARRIER OFF)
3 SINGLE-SWEEP
5 SET UP TEST FREQUENCIES**
CAT
V
/APPL CAT
V
Measurements Page 2 Menu Structure
(1 of 2)
TEST FREQUENCIES
0 User Defined
1 User Defined
2 User Defined (+0.00000HZ Default)
3 User Defined
4 User Defined
5 USE DEFAULT TEST FREQUENCIES
0 RUN CSO
1 STORE CURRENT RESULTS
2 DISPLAY RESULTS
3 PRINT CURRENT LEVELS*
4 PRINT STORED R ESULTS*
5 SET UP CSO
6 DIGITAL/ANALOG
7 IN-SERVICE
9 LEAVE CSO
TEST MODES
0 INTERACTIVE
1 AUTO
2 AUTO (PAUSE FOR CARRIER OFF)
3 SINGLE-SWEEP
4 CONTINUOUS
5 SET UP TEST FREQUENCIES AND
CONTINUOUS MODE PRMTRS**
TEST FREQUENCIES
0 User Defined (+1.25000MHZ Default)
1 User Defined (+750.000KHZ Default)
2 User Defined
3 User Defined (-750.000KHZ Default)
4 User Defined (-1.25000MHZ Default)
5 USE DEFAULT TEST FREQUENCIES
CONTINUOUS MODE PARAMETERS***
6 CARRIER FREQ***
7 TEST INTERVAL***
8 NORMALIZATION INTERVAL***
TEST MODES IN-SERVICE
0 INTERACTIVE
1AUTO
5 SET UP TEST FREQUENCIES**
***
Displayed only if CONTINUOUS mode
is selected.
**
Not displayed in INTERACTIVE mode.
*
RS-232 only.
0 RUN ADJACENT CHANNEL LEAKAGE
1 STORE CURRENT RESULTS
2 DISPLAY RESULTS
3 PRINT CURRENT RESULTS*
4 PRINT STORED R ESULTS*
5 MEASURE SIDE
9 LEAVE ACL