CHAPTER 4 NDA-24298
Page 96
Issue 1
ASYD : Assignment of System Data
186
b
0
System Message “7-0” is registered when no errors are detected
by the Routine Diagnosis Program (Refer to INDEX 89 and 90)
0/1 = Not Registered/Registered
b
1
System Message “7-P” is registered when an error is detected by
the Routine Diagnosis Program (Refer to INDEX 89 and 90)
0/1 = Not Register/Register
b
2
Fault Recovery Pattern upon TRK Ineffective Hold Detection
0 0 = Release all calls other than basic calls (two-way
calls), and register all call status.
0 1 = Register all call status
1 0 = Release all calls and register all call status
11=Not used
b
3
b
4
System Message Automatic output to System printer
(SYS 1, INDEX = 38, 39)
0/1 = Not Required/Required
0b
5
Not used
0b
6
Not used
1b
7
System Message Contents
0/1 = Simplified/Detailed (Always assign “1.”)
SYSTEM
DATA
TYPE
(SYS)
SYSTEM
DATA
INDEX
(INDEX)
0 – 511
DATA
(DATA)
00 – FF
(Hex)
BIT
CORRESPONDING
DATA
SYSTEM DATA CONTENTS
DATA
0/1
BIT
b
3
b
2