NDA-24298 CHAPTER 4
Page 317
Issue 1
APIPL : Assignment of IP Address Data for LDM
APIPL: Assignment of IP Address Data for LDM
1. General
This command is used to assign the IP address to Point Code. This data is written in the Local Data Memory
(LDM).
2. Precautions
1. This command is available.
3. Data Entry Instructions
Enter the IP address of the IPTRK card in the
Destination Node. Maximum of 8 IP addresses
of the IPTRK card can be assigned per a Node.
IP ADDRESS
Enter the Point Code of Destination Node.
PC
DESTINATION
POINT CODE
(PC)
1-16367
P/S
0/1
IP ADDRESS
MAX. 8 ADDRESSES
TIMER
0-127
REMARKS