CHAPTER 4 NDA-24298
Page 954
Issue 1
ALGNN : Assignment of Telephone Number Data for NDM
ALGNN: Assignment of Telephone Number Data for NDM
1. General
This command assigns the individual attendant identification number for Fusion service. The data assigned by
this command is written in Network Data Memory (NDM) of the Network Control Node (NCN), updating the
NDM at each Local Node (LN).
2. Precautions
1. The applicable tenant number (TN) range is designated by the ASYDN command, SYS 1, INDEX 8. If
the numbering plan is common for all tenants (ASYDN, SYS1, INDEX 800, bit0 = 1), assign TN
parameter as “1” for all tenants.
2. The system data assignment (ASYDN, SYS 1, INDEX 514, bit1 = 1) is needed to provide the Network
Data Memory (NDM).
3. Before assigning this command, ANPDN/ASPAN commands are required for the numbering plan of the
Telephone Number (TELN).
4. A unique Telephone Number (TELN) should be given within a User Group Number (UGN).
5. For detailed information, see the NEAX2400 IPX Fusion Network System Manual.
3. Data Entry Instructions
USER GROUP
NUMBER (UGN)
TELEPHONE STATION NUMBER (TELN)
MAX. 16 DIGITS
REMARKS
1 40000
1 40001
1 40002
UGN
1 = User Group Number 1 (Fixed)
TELN
Assign Telephone Number (Unique TELN should be
given within a UGN)