CHAPTER 4 NDA-24298
Page 642
Issue 1
ACIC1 : Assignment of CIC Code Data 1
ACIC1: Assignment of CIC Code Data 1
1. General
This command is used for CCIS and/or ISDN data programming, and is assigned in the Common Channel
Signaling Controller Group (CSCG) for a determinate Point Code (PC).
Note:
In this command, Determinate Point Code is synonymous with Destination Point Code; the terms are used
interchangeably.
2. Precautions
1. ACIC2 command assignment is also required for CCIS, and the PC parameter is an intermediate of those
two commands.
2. ACIC2 command is not required for ISDN.
3. The PC parameter should correspond to the data assigned by the ADPC command.
4. The CSCG parameter should correspond to the one assigned by the ACSC command.
5. When this command is used for CCIS, all Point Codes (PC) within the network (except the Originating
Point Code) should be assigned.
3. Data Entry Instructions
1 130
Assign any even number ranging from 2 to 254,
however, the exception is 128.
CSCG
DETERMINATE POINT CODE (PC)
1-16383
COMMON CHANNEL SIGNALING CONTROLLER
GROUP NUMBER (CSCG) 2-255
Determinate Point Code assigned by
the ADPC command and the final
destination's Point Code in CCIS
network.
PC