NDA-24298 CHAPTER 4
Page 813
Issue 1
ACNPN : Assignment of Calling Number Pattern for NDM
ACNPN: Assignment of Calling Number Pattern for NDM
1. General
This command assigns the Calling Number Pattern (CNP) to the route which is used for the SID To Network-
Present service/for the Calling Party Recognition service. The data assigned by this command is written in
Network Data Memory (NDM) of the Network Control Node (NCN), updating the NDM at each Local Node
(LN).
2. Precautions
1. Enter a B-Channel Logical Route Number in the LGRT parameter.
2. The CNP parameter in this command corresponds to the one assigned by ACNDN command.
3. Assign the Calling Number Pattern (CNP) to Incoming Call and Outgoing Call each.
4. When the Calling Party Recognition is used in TAPI service, this command is to be assigned to the
incoming route of COT which receives the calling number information from Central Office (analog)
directly.
5. This command must be used in a pair with ACNDN command.
3. Data Entry Instructions
KIND OF
CONNECTION
(IC/OG)
I/O
CALLING NUMBER
PATTERN
(CNP)
1-1023
LOGICAL ROUTE
NUMBER
(LGRT)
REMARKS
LGRT
Enter the logical route number of the B-channel
IC/OG
I = Incoming Call (Calling Party Recognition)
O = Outgoing Call (SID To Network-Present)
CNP
Enter the arbitrary number within the range
between 1 and 1023.