Filter
Top Products
NDA-24298 CHAPTER 4
Page 565
Issue 1
ALRNN : Assignment of Logical Route and Route Class Data for NDM
91 TOCI
Trunk Override Calling
0 = Override Inhibited (Calling side).
1 = Tie Line Override Service is provided (Calling side).
92 TOCD
Trunk Override Called
0 = Override Inhibited (Called side).
1 = Tie Line Override Service is provided (Called side).
93 ODGD 0 0 0 0 Always assign data “0.”
94 RLS 0 0 0 0 Always assign data “0.”
95 GWD
Gate Way Data Service
0= Out of Service 1 = Gate Way System
2-15= Not used
96 H1
ISDN H1 Switching
0=– 1=In Service
0 0 0 0 Always assign data “0.”
97 DT 0000
98 CI
ISDN transmitting information
0 = Out of Service
1 = 16-Digit Caller Number Service, Attribute Informa-
tion Notification Service, and Calling Sub-Address
Transfer Service
2-15= Not used
99 OID 0 0 0 0 Always assign data“0.”
100 TKS 0 0 0 0 Always assign data“0.”
101 PAD2
Pad Control Data 2
0-7 = For Pad value, See the NEAX2400 IPX Circuit Card
Manual.
PAD value can also be set
by switch setting on the
8TLT (Long Line
Telephone = TELT) card.
102 TRM 0 0 0 0 Always assign data “0.”
103 TRPX 0 0 0 0 Always assign data “0.”
104 LDR 0 0 0 0 Always assign data “0.”
105 TSC 0 0 0 0 Always assign data “0.”
106 SATS 0 0 0 0 Always assign data “0.”
107 RVPX 0 0 0 0 Always assign data “0.”
108 DQ 0 0 0 0 Always assign data “0.”
109 SLOV
Slumber Time Override Service
0 = Out of Service 1 = In Service
0000
110 SDTO
System message automatic output when Connection Ac-
knowledge signal has not been received.
0 = Out of Service 1 = In Service
111 ADVPRA
ISDN PRI Failure Routing Service
0 = Out of Service 1 = In Service
This data is valid for
dummy routes.
112 IND
Inter-office Name Display
0 = Out of Service 1 = In Service
113 UUI 0 0 0 0 Always assign data “0.”
LOGICAL ROUTE (LGRT) 1-899
REMARKSFUSION POINT CODE (FPC) 1-253
ROUTE NUMBER (RT) 1-255