CHAPTER 4 NDA-24298
Page 770
Issue 1
ATAS : Assignment TAS Service Data
ATAS: Assignment TAS Service Data
1. General
This command assigns the data related to the Trunk Answer From Any Station (TAS) service feature.
2. Precautions
1. One tenant can be provided one TAS indicator.
2. The TAS answer access code is assigned by the ASPA command, SRV = SSC, SID = 16.
3. The TAS answering capability is assigned by the ASFC command, SFI=13 and the ACFR command,
TSFI = 5.
4. The applicable Tenant Number (TN) range is designated by the ASYD command, SYS 1, INDEX 8. If
data for this command is common for all tenants (ASYD command, SYS1, INDEX 93, bit2 = 1), assign
TN parameter as data “1” for all tenants.
3. Data Entry Instructions
TENANT NUMBER
(TN)
UNIT NUMBER
(UNIT)
0-3
MODULE GROUP
NUMBER
(MG)
CIRCUIT NUMBER
(CN)
0/1
REMARKS
TN
Enter the tenant number to be applied to the TAS
service.
UNIT
Enter the Unit number of the TAS indicator.
CN
MG
Enter the circuit number of the TAS indicator .
Enter the module Group number the TAS
indicator is mounted.