CHAPTER 4 NDA-24298
Page 380
Issue 1
ATDPN : Assignment of Toll Code Restriction Data for NDM
If data is set as follows, a toll call can be restricted by developing NPA - Nxx.
• At Toll Code Restriction Data (ATDPN)
DC = 9-1, TDI = 2, NND = 6 (NPA - Nxx)
• At Area & Office Code Data (AARPN)
DC = NAP - Nxx (6 digits)
4. Data can be entered on a Day/Night basis, if specified by the ASYDN command, SYS 1, INDEX 75, Bit 3
= 1.
5. The rest of the parameter appearance depends on the data entered in TDM/OG parameter.